vacuum sintering

The Development of Model ZSD 50 High Vacuum Ta Sintering Furnace

ZSD－50型高真空钽烧结炉的研制

Experimental study on sintering to extract Al by low-valency compounds in vacuum

真空下低价化合物法提取铝的新工艺&原料烧结实验研究

In this paper, the basic constructure, operation principle and technical process of the three-location vacuum pre-sintering furnace for Tantalum capacitor are described. And the application of this equipment in Tantalum capacitor manufacture trade is introduced.

介绍了三工位片式钽电容器真空预烧炉的基本结构、工作原理及钽电容器阳极块真空预烧的工艺过程，并对该设备在片式钽电容器制造行业的意义进行了阐述。

The Temperature Controlling System of Vacuum Sintering-Furnace

真空烧结炉温控系统

The technique of vacuum fusion sintering is introduced emphatically.

重点介绍了采用真空熔烧法制备功能梯度材料.

Study is made of the effects and effecting mechanisms of a new type of grain growth inhibitor on vacuum sintering behavior of nanometer cemented carbide.

研究了一种新型晶粒长大抑制剂对纳米硬质合金真空烧结行为的影响，探讨了其影响机理。

The expansion and dehiscence behavior during the vacuum reactive sintering below 660 ℃ of compact Ti/ Al composite powders was experimentally investigated, and the reasons of expansion and dehiscence were theoretically analyzed.

低温反应烧结工艺：研究了高能球磨Ti/Al复合粉体在温度低于660℃下真空无压反应烧结过程中的膨胀和开裂行为，分析了产生膨胀和开裂的主要原因；

Metal Injection Molding, One step Vacuum de-wax sintering process, Powder metallurgy monthly.

1金属粉末射出成型真空一次 脱蜡 烧结法, 粉末冶金月刊.

Ternary boride based cermet cladding material was prepared by in situ reaction and liquid phase sintering technology in vacuum furnace.

在真空烧结炉中通过原位反应液相烧结工艺制备出三元硼化物基金属陶瓷覆层。

The composites of different Mo/ Si ratio were prepared by vacuum liquid reactive sintering. The phase composition and microstructure of composites was analyzed by XRD and SEM, respectively. Their coefficients of thermal expansion ( CTE) were measured by thermal dilatometer.

利用液相反应烧结制备不同配比的Mo-Si复合材料，用X射线分析相组成，扫描电镜观察微观组织形貌，热膨胀仪测不同块体材料的热膨胀系数（CTE）。